Ill have to admit, i screwed up. Yesterday i was trying to pair my bluetooth headset with my samsung ua48h6400 and i read online that i had to turn on the aditional blutooth settings in service menu to do so.So, i went into the service menu and turned the settings on but then i started exploring the service mwnu and i accidently hit the av calibration button and the screen went dark instantly.It showed failure infront of the av calibration button and now i cant figure out how to fix it. I tried the cube picture calibration but all in vain. I read online that manually putting in the values can restore the settings so i want the default service menu setings, the white balance, the adc result e.t.c and anything else that might help restoring the colors of the screen back and yeah, the colors are perfect on hdmi the problem is only in av.Please help.
↧
[H] Support • need default service menu settings for samsung UA48H6400
↧
[E] Support • Brick EU40ES6100
Hi,
I have a problem with the motherboard. I entered the hidden menu and the tv had a brick. I have reset on eeprom and nothing, the tv does not turn on. The motherboard is bn94-05678t. Which motherboard models are compatible with mine and some solution. Thank you all
I have a problem with the motherboard. I entered the hidden menu and the tv had a brick. I have reset on eeprom and nothing, the tv does not turn on. The motherboard is bn94-05678t. Which motherboard models are compatible with mine and some solution. Thank you all
↧
↧
[K] General • Rooting LATEST K series?
Hello, I have a UE55KS8000 with firmware 1222.
I would like to know how to downgrade this firmware if it is possible and that it is the technique to downgrade a firmware K (I read a topic for the J version with firmware 00000, but did not find enough detail for understand)
I would like to know how to downgrade this firmware if it is possible and that it is the technique to downgrade a firmware K (I read a topic for the J version with firmware 00000, but did not find enough detail for understand)
↧
[K] General • Automatic switch audio out DolbyD/DTS
Hello to you, I just discovered your forum (it's a shame for me, I wish I could root my TV).
I have a UE55KS8000 with the firmware 1222, I would like to know if in the "Service Menu" it is possible to activate recognition of the audio source DolbyD and DTS automatically for audio output HDMI Arc and Optical, without having to each time go through the audio menu to make this selection manually?
I have a UE55KS8000 with the firmware 1222, I would like to know if in the "Service Menu" it is possible to activate recognition of the audio source DolbyD and DTS automatically for audio output HDMI Arc and Optical, without having to each time go through the audio menu to make this selection manually?
↧
[J] General • What can I do more?
Hello! I have a JU7500 TV and I can not understand what can I do more using root on my TV.
Can I just add the "apps" listed here viewforum.php?f=87 or there is something more somewhere?
Can I just add the "apps" listed here viewforum.php?f=87 or there is something more somewhere?
↧
↧
[F] Software • [App] More TV channels on E/F/H series
Thanks for prompt response.
I have short list - only ~30 DTV channels and ~200 SAT channels in scm file
Most probably it will be difficult to prepare the same list for DTV and SATV
Not sure how it should work and how TvList.xml on that case should look like
because there is one file for both lists: DTV and SATD
I have short list - only ~30 DTV channels and ~200 SAT channels in scm file
Most probably it will be difficult to prepare the same list for DTV and SATV
Not sure how it should work and how TvList.xml on that case should look like
because there is one file for both lists: DTV and SATD
↧
[F] General • My F5410AW is dead?
Could you upload SubMicomEU.bin here? This file is the same for all bricked TVs?if you still have TV you could try put the firmware on USB and turn on TV maybe is searching for correct files or get from some rooted TV file with name SubMicomEU.bin or something similar and try also with this file. Could be useful or don't, I don't know, I never tried. I have this file on usb stick just for case if something happens
I don't take any responsibility for this is just a suggestion
Factory Settings.jpeg
Software Upgrade.jpeg
submicom upgrade.jpg
↧
[J] Software • [APP] Hyperion (Ambilight)
Is It run on serie K?
↧
[H] Firmware • Samsung UE48H6400's firmware in UA48H6400
hello everybode, so i have been planning on flashing my tv (Ua48H6400) for a couple of days. Today i searched for the firmware on the internet and on the official samsung website, i found that the last update of my tv's firmware was released in 2017 but the last update of UE48H6400 was in 2018 . i searched online and found that the only difference between the two was that the UA model was made for asia and the UE model was made for europe. So, can i flash my asian model with european model's firmware?
↧
↧
[D] Firmware • TV D-Series Firmware Downgrade (SamyGO Proof of Concept)
Hello,
And would not this be done as a file over a flash usb?
And would not this be done as a file over a flash usb?
↧
[H] Software • [App] libAmbiLight E/F/H
Ok guys... I'm back on track ![:-)]( "Smile")
Some good and some bad news.
Bad:
There are users, which can run libScreenShot without ALT-method, and some that can run it only with ALT-method. When I use libScreenShot or libAmbiLight with ALT-method my TV crashes, so unfortunatelly, I'm not able to test if the ALT method works or not.
Good:
Nevertheless, I've tried to implement, ALT-method blindfolded![:P]( "Razz")
. I don't know wheter it works or not. I've also implemented some loggings for further investigation. Also, there's now a simpler method for testing, where you don't need to restart your TV each time. Just in case it crashes, you have to restart ![:-D]( "Very Happy")
Your part:
I've atteched a new file libAmbiLight_TEST.zip, and an image-file with different colors, which you can use for testing. Please open that image on your TV and make sure, that it's fully displayed (no OSD, or any black borders) and then run the test-command. Please, post your log outputs, for me to investigate.
Testing
To test if everything works fine, modify and execute the following command.or with ALT
If everything works well, you should see a sample output like
I hope we can make it![;-)]( "Wink")
cheers,
adonis
Some good and some bad news.
Bad:
There are users, which can run libScreenShot without ALT-method, and some that can run it only with ALT-method. When I use libScreenShot or libAmbiLight with ALT-method my TV crashes, so unfortunatelly, I'm not able to test if the ALT method works or not.
Good:
Nevertheless, I've tried to implement, ALT-method blindfolded
. I don't know wheter it works or not. I've also implemented some loggings for further investigation. Also, there's now a simpler method for testing, where you don't need to restart your TV each time. Just in case it crashes, you have to restart 
Your part:
I've atteched a new file libAmbiLight_TEST.zip, and an image-file with different colors, which you can use for testing. Please open that image on your TV and make sure, that it's fully displayed (no OSD, or any black borders) and then run the test-command. Please, post your log outputs, for me to investigate.
Testing
To test if everything works fine, modify and execute the following command.
CODE:
samyGOso -d -T -B -l /mnt/opt/privateer/usr/libso/libAmbiLight.so H_LEDS:36 V_LEDS:18 SERVER_IP:192.168.1.32 SERVER_PORT:5050 OFFSET:17 REVERSE TESTCODE:
samyGOso -d -T -B -l /mnt/opt/privateer/usr/libso/libAmbiLight.so H_LEDS:36 V_LEDS:18 SERVER_IP:192.168.1.32 SERVER_PORT:5050 OFFSET:17 REVERSE TEST ALTCODE:
[AmbiLight] AmbiLight started[AmbiLight] Series H detected[AmbiLight] We have data....[AmbiLight] final-pixel: [255,0,0]....[AmbiLight] final-pixel: [255,255,0]...[AmbiLight] final-pixel: [0,255,0]....[AmbiLight] final-pixel: [0,0,255]....[AmbiLight] AmbiLight endedI hope we can make it
cheers,
adonis
↧
[H] Support • Satelites file change in rooted H series?
Is it possible to change satellites file in rooted h series tv just like it is possible to change satellites.xml file in enigma2 boxes?
↧
[F] Support • Camera Stream on TV
Hello,
I want to have the camera stream on my TV. Is there a change make it as a sender on the channelliste?
If iti not work, then which app works?
Camera Infos:
Stream: rtsp
Codec: H.264
TV:
Samsung UE40F8090 with root
Samsung UE32J6350 with root
I want to have the camera stream on my TV. Is there a change make it as a sender on the channelliste?
If iti not work, then which app works?
Camera Infos:
Stream: rtsp
Codec: H.264
TV:
Samsung UE40F8090 with root
Samsung UE32J6350 with root
↧
↧
[C] Software • *** Requests for apps/patches C series ***
Please someone can share a copy of ruSamsungTvCommunicator?
Latest version should be 0.0.17.0 beta.
Currently, almost all links to C-series software are dead links.
Thank you!
Latest version should be 0.0.17.0 beta.
Currently, almost all links to C-series software are dead links.
Thank you!
↧
[K] General • K Model Service Menu
Is PIP a regional / country feature?
In service menu I've activated MultiScreenII but still no PiP
I've activated Bluetooth in SM but still only getting "not supported" in BT address
Is that a region/country thing as well?
Also can anyone point out hoe to get into the advanced options of service menu
In service menu I've activated MultiScreenII but still no PiP
I've activated Bluetooth in SM but still only getting "not supported" in BT address
Is that a region/country thing as well?
Also can anyone point out hoe to get into the advanced options of service menu
↧
[F] Software • [App] More TV channels on E/F/H series
Hello,
I use only Sat on my TV, so I have no channel on "map-AirA", can I also a new channel on "map-SateD"?
I use only Sat on my TV, so I have no channel on "map-AirA", can I also a new channel on "map-SateD"?
↧
[H] General • Can you give some answers about that?
Hello,
I know this is a strange discussion, but everyone has its problems.![:-)]( "Smile")
I have this model and I'm from Italy.
This tv seems to be an europe warranty model and if I go in menu, system, accessibility, I can't find "vocal guide" that is a feature that allow visual impaired people, like me, to manage the tv with an internal vocal synthesizer.
We tried to change language for the menu, for example from Italian to English, but nothing, the vocal guide doesn't exists.
After contacting Samsung, they say that this is a feature available only on some countries and, since I have an europe product, this feature is not available.
well, really angry!
So what I'm asking you is if it is possible to install on this tv a different firmware, something that allows me to use the vocal guide.
The problem is that... I update the firmware to last version because I thought that the problem was in the firmware, not in the tv itself.
Thank you for your patience and support!
I know this is a strange discussion, but everyone has its problems.
I have this model and I'm from Italy.
This tv seems to be an europe warranty model and if I go in menu, system, accessibility, I can't find "vocal guide" that is a feature that allow visual impaired people, like me, to manage the tv with an internal vocal synthesizer.
We tried to change language for the menu, for example from Italian to English, but nothing, the vocal guide doesn't exists.
After contacting Samsung, they say that this is a feature available only on some countries and, since I have an europe product, this feature is not available.
well, really angry!
So what I'm asking you is if it is possible to install on this tv a different firmware, something that allows me to use the vocal guide.
The problem is that... I update the firmware to last version because I thought that the problem was in the firmware, not in the tv itself.
Thank you for your patience and support!
↧
↧
[M/Q] General • PIP in UE40MU7000
I've got the UE50MU7980 and also searched the SM, found MultiScreenII and activated it but still no PiP
Also trying to activate Bluetooth but it won't
Also trying to activate Bluetooth but it won't
↧
[E] Hardware • UE32EH5300WXXH
Hi All,
I'm living in UK and have got a TV from Europe "UE32EH5300WXXH". Unfortunately I don't have HD channels. I have bought service remote AA81-00243B and changed local set to EU_UK. My tuner settings currently on SI_ATC2. I have changed this to Auto and have done Factory reset. System itself chosen the SI_ATC2 again. I'm thinking if I can change this to DVB_TCS2, DVB_T2C or DVB_T2CS2 so this will give me HD channels? Could somebody please confirm that I can do this without brick my TV?
Type: 32A6AF0D
Many thanks for your help.
Kind Regards.
I'm living in UK and have got a TV from Europe "UE32EH5300WXXH". Unfortunately I don't have HD channels. I have bought service remote AA81-00243B and changed local set to EU_UK. My tuner settings currently on SI_ATC2. I have changed this to Auto and have done Factory reset. System itself chosen the SI_ATC2 again. I'm thinking if I can change this to DVB_TCS2, DVB_T2C or DVB_T2CS2 so this will give me HD channels? Could somebody please confirm that I can do this without brick my TV?
Type: 32A6AF0D
Many thanks for your help.
Kind Regards.
↧
[E] Support • Bricked My Samsung UN46ES6580 TV
Was in service menu and accidently hit the “SUBMICOM UPGRADE (OFF)”
TV has no picture and front LED light is off.
Would appreciate help so my wife does not kill me.![:oops:]( "Embarrassed")
Model UN46ES6580F
Type No. UN46ES6580
Model Code UN46ES6580FXZA
Version TS01
2012 LED Smart TV
ES6500 Series
Thank you in advance.![:ugeek:]( "Uber Geek")
TV has no picture and front LED light is off.
Would appreciate help so my wife does not kill me.
Model UN46ES6580F
Type No. UN46ES6580
Model Code UN46ES6580FXZA
Version TS01
2012 LED Smart TV
ES6500 Series
Thank you in advance.
↧