Note that this program works fine when ran through Wine as well. Switch to the plain "Windows" skin to avoid the black UI elements. Bug report regarding that in Wine's bug tracker: https://bugs.winehq.org/show_bug.cgi?id=48566
↧
[F] Software • [PC] SamyGO PVRDecoder for E/F/H series - Version 1.8.2.53
↧
[F] Firmware • Firmware dump question PN60F5300
Hi everyone, I am new here so excuse me for my ignorance. I went thru posts and searches but could anyone clarify if the files in the donation section could help me :
I just finished repairs on a Samsung PN60F5300 (AFXZA) but I have a 4-blink sequence on the main board LED. This seems to point to a SW/Logic issue. All boards seem OK but the main board shuts down de high voltages sections. I would like to re-flash the firmware on the two serial EEPROM chips (I have a programmer) but need binary dumps.
...unless there is another way to have the board eat a USB firmware on boot?
Thank you for your input!
JLCurve
I just finished repairs on a Samsung PN60F5300 (AFXZA) but I have a 4-blink sequence on the main board LED. This seems to point to a SW/Logic issue. All boards seem OK but the main board shuts down de high voltages sections. I would like to re-flash the firmware on the two serial EEPROM chips (I have a programmer) but need binary dumps.
...unless there is another way to have the board eat a USB firmware on boot?
Thank you for your input!
JLCurve
↧
↧
[H] Brainstorm • Call for H testers
http://downloadcenter.samsung.com/conte ... 1360.1.exe
Keep in mind that if you don't block updates you'll get 1420 over and over![:ugeek:]( "Uber Geek")
Keep in mind that if you don't block updates you'll get 1420 over and over
↧
[F] Software • [App] libSpdifVolume D/E/F/H
Basically there's zero chance for any Orsay stuff to work on Tizen.
I've got one for K though, will release it since requested. First have to make it a bit more friendly (now using it myself only![:)]( "Smile")
)
edit: here you go: [App] libSPDIFvolume K
I've got one for K though, will release it since requested. First have to make it a bit more friendly (now using it myself only
)edit: here you go: [App] libSPDIFvolume K
↧
[K] Software • [App] libSPDIFvolume K
Lib allows to control optical out (and bluetooth devices) volume using RC volume keys. Works only if external out mode is set to PCM, not possible in AC3/DTS/passthrough because it... pass through! ![:)]( "Smile")
Usage:
Two args can be adjusted on top of script:
Also note that unlike on pre-Tizen TVs, injecting lib will affect TV speaker volume. Explanation is that Tizen only offers 10 gain steps on SPDIF, therefore volume adjustment has to be a mix of master and spdif gains to get a sufficient range. A nice side-effect is that lib also works to adjust bluetooth devices volume.
Reminder: Watchdog must be disabled in service menu for lib to work.
Logfile is written to /tmp/SPDIFvolume.log
Usage:
- Extract attached archive
- Copy 60_SPDIFvolume.init to SYSROOT/etc/init.d
- Copy libSPDIFvolume.so to SYSROOT/usr/so
- Reboot TV or start script manually:
CODE:
$SYSROOT/etc/init.d/60_SPDIFvolume.init start
Two args can be adjusted on top of script:
- THRESHOLD:<500 - The higher it is, the lower minimal SPDIF volume will be (kind of negative gain). Max value is 500 and basically corresponds to silence at volume=0. Default value is 400.
- STEP:10 - How much to remove to threshold on each volume step. For example if THRESHOLD=400 and STEP=10 (default value) then max spdif will be reached at 400/10=volume 40.
Also note that unlike on pre-Tizen TVs, injecting lib will affect TV speaker volume. Explanation is that Tizen only offers 10 gain steps on SPDIF, therefore volume adjustment has to be a mix of master and spdif gains to get a sufficient range. A nice side-effect is that lib also works to adjust bluetooth devices volume.
Reminder: Watchdog must be disabled in service menu for lib to work.
Logfile is written to /tmp/SPDIFvolume.log
ChangelogShow
CODE:
5/2/2020v0.1.1 - First release↧
↧
[H] Support • Need default service menu for Samsung UE22H5000
Hi guys,
please help me! I've been searching for a solution for YEARS!
When I was younger, I used to kind of "play" with the service menu of my Samsung UE22H5000 and I messed it up lol. Anyways. Somehow I found a way to use my TV again but now that I bought a computer i want to use it as my monitor; and here it comes the problem. When I first connected the computer to my TV the resolution looked VERY LOW and despite trying to change all the settings on my computer nothing actually changed. Then i connected my PC to another Samsung TV and everything looked perfect, so it's definetly the tv's fault, and that's why I want to change the service menu settings back to default. It would be a dream if you could help me!
Thanks in advance,
dinak
please help me! I've been searching for a solution for YEARS!
When I was younger, I used to kind of "play" with the service menu of my Samsung UE22H5000 and I messed it up lol. Anyways. Somehow I found a way to use my TV again but now that I bought a computer i want to use it as my monitor; and here it comes the problem. When I first connected the computer to my TV the resolution looked VERY LOW and despite trying to change all the settings on my computer nothing actually changed. Then i connected my PC to another Samsung TV and everything looked perfect, so it's definetly the tv's fault, and that's why I want to change the service menu settings back to default. It would be a dream if you could help me!
Thanks in advance,
dinak
↧
[N/QN] General • Enabling PVR?
I have an NU8000 US version and I'm looking to enable PVR. The local set options are None, US, Canada, Mexico. Has anyone ever chose none and if so what did it do? Also, do I have to change my smart hub settings as well? I have a Samsung Service Remote so I've been able to get to the hidden menu, I'm not sure if I can get to the advanced menu portion using the 0000 code or not yet. I'd be grateful for any help.
↧
[D] Support • Downgrade D6200 firmware from 1028
Hello all,
I'm new and tried to Downgrade my D6200 from FW 1028.
No success till now![:(]( "Sad")
DNS Trick doesn't work -> Error 601 and Error 606 on my 2nd TV ( C6800 )
Did anybody sucessfully Downgrade and has a step by step guide How To ?
Kind regards,
Peter
I'm new and tried to Downgrade my D6200 from FW 1028.
No success till now
DNS Trick doesn't work -> Error 601 and Error 606 on my 2nd TV ( C6800 )
Did anybody sucessfully Downgrade and has a step by step guide How To ?
Kind regards,
Peter
↧
[J] General • Implementation of vertical and horizontal sharpness?
Hey guys,
it's my first post so forgive me possible mistakes.
So I want to use the service menu on my Samsung UE40J6350 (UE40J6350SUXZG) (panel: 40A1AF0WJ)
But for now I don't want to setup PVR or anything like that. If possible I "just" want to raise the horizontal display sharpness.
Why? I had to use a 10 year old FHD LG-TV last week and played Red Dead Redemption 2 on my PS4 Pro with supersampling.
The game runs not in native 4k on the Pro but in 1920x2160 which is upscaled to 4k via checkerboard rendering.
This makes the game (and other games with the same "issue") look washed out, it just feels not right (but playable).
So when I saw that even this 10 year old LG-TV offers seperate adjustments for horizontal and vertikal sharpness,
I turned horizontal higher and was impressed HOW MUCH better the game looked, damn close to 4k and way better than before.
Now that I use my beloved J6350 again I was wondering if it would be possible to implement this "feature" in some way.
I'd be happy to here from you!
it's my first post so forgive me possible mistakes.
So I want to use the service menu on my Samsung UE40J6350 (UE40J6350SUXZG) (panel: 40A1AF0WJ)
But for now I don't want to setup PVR or anything like that. If possible I "just" want to raise the horizontal display sharpness.
Why? I had to use a 10 year old FHD LG-TV last week and played Red Dead Redemption 2 on my PS4 Pro with supersampling.
The game runs not in native 4k on the Pro but in 1920x2160 which is upscaled to 4k via checkerboard rendering.
This makes the game (and other games with the same "issue") look washed out, it just feels not right (but playable).
So when I saw that even this 10 year old LG-TV offers seperate adjustments for horizontal and vertikal sharpness,
I turned horizontal higher and was impressed HOW MUCH better the game looked, damn close to 4k and way better than before.
Now that I use my beloved J6350 again I was wondering if it would be possible to implement this "feature" in some way.
I'd be happy to here from you!
↧
↧
[M/Q] General • [MU 6xxx EU series Guide summary] Enable PVR - Remove local region app from Smart Hub and some tips
Hi all
I can see on "Service Menu" under MRT Option, one option where can I can read "IOT Hub Support", can it be a solution for Turn On Wake On Lan?
Regards!!
I can see on "Service Menu" under MRT Option, one option where can I can read "IOT Hub Support", can it be a solution for Turn On Wake On Lan?
Regards!!
↧
[N/QN] General • firmware rollback
Only if updates block and you stop updating. if you keep on getting fw updates no way to roll backfirmware rollback possible? NU8000
↧
[H] Software • [ROOT] H "Network" root (FW<=Oct.2015, no T-GFS)
All the steps from the first page are correct, but information is not mention for T-NT14UDEC-1023.2 model you need pick diffrent file from folder InstallSamyGO-H/data unzip and replace with other one.
↧
[M/Q] General • New findings in service menu and other useful information
Inspired by Kazar's post about various service menu settings, I took the chance to explore them further on the latest firmware 1280.5.
Many people used to take photos of service menu before making any changes. It's a good practice, but photos are not editable. So I decided to write down most service menu settings in plain text format (see attached "Service Menu.txt"). Yeah, that was tedious and hard work...
Here is a brief excerpt of the most interesting things that I've found. For details, see attached file.
First, let me address the issue with unsuccessful attempts to enter service menu. The point is you have to wait a little after powering off the TV. Press and hold Info button on your remote control, and watch the standby LED. It should be blinking. If not, just wait up to a minute.
Alternatively, connect the power supply to power meter. As soon as power consumption drops below 1 W, the TV is ready to accept the commands to enter service menu.
Option => Factory Reset
Has the same effect as Settings => Support => Self Diagnosis => Reset, but also clears network settings.
Option => MRT Option => Language Set
Defines the languages available in Settings => General => System Manager => Language.
Option => MRT Option => PnP Language
This language is used for onboarding (initial Welcome message) when you power on TV for the first time after purchase, or after reset.
Option => MRT Option => WIFI REGION
In case of any Wi-Fi connectivity problems, change the value to "A".
Option => MRT Option => OTN Support
Seems like this option is not related to software updates via DVB-T/C/S.
Option => MRT Option => OTA Support
Updates the software via wired or wireless connection.
Option => MRT Option => Teletext (TTX)
If set to OFF, teletext is not available, TTX/MX button on remote control doesn't work.
Option => MRT Option => Extended PVR
Allows manual and scheduled recording of TV programmes on external USB device (hard drive or high-performance flash). Also enables Timeshift feature.
Option => MRT Option => HV Flip
Do not change! If set to ON, the picture turns upside down on the next power on.
Option => MRT Option => BT Support
Use to enable Bluetooth after replacing Wi-Fi module with Wi-Fi+Bluetooth module. Not tested yet.
Option => MRT Option => HP LINE
If changed from Headphone to LineOut, allows to get the sound from headphone jack and TV speakers at the same time.
Option => MRT Option => Instant On
If set to ON, TV starts faster, because it skips full initialization, including "Samsung SmartTV" boot logo.
Option => MRT Option => Always Instant On Support
Seems like the purpose of this setting is similar to "Instant On", but for the case when power supply connects to the mains outlet.
Option => MRT Option => Motion plus
If set to OFF, "Auto Motion Plus Settings" menu is replaced with "LED Clear Motion" in Settings => Picture => Expert Settings.
Option => MRT Option => Sound Mirroring
If set to ON, adds "Sound Mirroring" item to Settings => Sound => Expert Settings with the following description: "Share your mobile device's sound using your TV speakers".
Option => MRT Option => SPDIF Support
If set to OFF, "Audio Delay" disappears from Settings => Sound => Expert Settings. It means that Audio Delay is likely to apply to SPDIF out only (not HDMI-ARC, TV speakers, or headphones).
Option => MRT Option => HDR PLUS Support
If set to ON, "HDR+ Mode" item appears in Settings => Picture => Expert Settings, and affects the picture when activated. However, Windows 10 doesn't recognize monitor as HDR.
Option => MRT Option => 360 Audio Support
Probably, relates to VR or Xbox 360 audio.
Option => Production Option => Type Of PANEL KEY
Defines the type and position of OSD (On Screen Display) when using joystick button on the back of TV.
Option => Production Option => Auto Power
Defines whether TV should be turned on/off when the power in outlet is restored after blackout.
Option => Production Option => OCM Support
Do not change! Otherwise, your TV will turn to a brick, constantly showing a picture with TV connected to Samsung One Connect Mini device.
Option => Production Option => Blur Reduction
If set to ON, adds "Blur Reduction" slider to Settings => Picture => Expert Settings => Auto Motion Plus Settings.
Option => Production Option => Smart Audio Support
Replaces "Optimized" item with "Music, Movie, Clear Voice" in Settings => Sound => Sound Mode.
Adds "Auto Volume" to Settings => Sound => Expert Settings.
Option => Production Option => Autovol Support
Enables "Auto Volume" in Settings => Sound => Expert Settings. Go to that menu to activate it.
Option => Production Option => Equalizer Band
Allows to reduce the number of equalizer bands down to 4 in Settings => Sound => Expert Settings => Equalizer.
Option => Production Option => DDP Audio Out Support
Dolby Digital Plus. Not tested.
Option => Production Option => Show power on with mobile
Adds "Power On with Mobile" item to Settings => General => Network. If this item is not activated, power consumption in standby mode is getting down to 0.3 W (from usual 0.5 W), because Wi-Fi and LAN modules are turned off.
Option => Engineer Option => Caption Brightness
Probably, allows to decrease subtitles brightness in movies. Doesn't affect teletext subtitles.
Control => Sub Option => Watchdog
If set to OFF, it may prevent continuous TV reboots.
Control => Sub Option => TTX Group => UserOSD
Defines teletext language. Not related to "Teletext Language Settings" menu in Settings => Broadcasting => Expert Settings.
Control => Sub Option => ACM_MC
If set to ON, adds "Wi-Fi Speaker Surround Setup" to Settings => Sound. Only available when at least one Samsung Multiroom Link compatible speaker is connected to the TV.
Control => Hotel Option => Hospitality Mode
If set to ON, it allows to modify some useful items, but "Broadcasting" section in Settings menu gets unavailable.
Control => Shop Option => Exhibition Mode
If set to ON, disables some buttons on remote control: channel up/down, numbers, off command.
Control => Sound => SPDIF PCM Gain
Changes the volume on SPDIF out when TV is selected as a source.
Debug => No Signal Power OFF
If set to OFF, TV doesn't go to standby mode in 15 minutes after the signal on HDMI input disappears.
Debug => Default HDMI1 Booting
If set to ON, TV switches to HDMI1 after power on. Very helpful when TV is used mostly as PC monitor.
SVC => Info => Panel Display Time
Shows the number of hours the TV was in ON state. The value reverts to 0 after each reset.
SVC => Reset => Apps Reset
Doesn't affect the number of (pre)installed applications in Smart Hub.
SVC => Reset => SVC Reset
Same as Settings => Support => Self Diagnosis => Reset.
SVC => Upgrade => SUBMICOM UPGRADE
Do not change! Many people complain that this setting bricks the TV.
SVC => Other Setting => Expert => N/D ADJ
Night and day adjustment or calibration. When the source is TV, two profiles are added to Settings => Picture => Picture Mode: CAL_Night and CAL_Day.
SVC => Other Setting => Source Banner Hide
If set to ON, prevents annoying banner that appears on the top of the screen after source selection.
WBMovie => MODE
If "Dynamic" is changed to "Movie", items in this section define the default values for Movie picture mode, although not all of them work. These items help to preserve the values in user Settings after entering the service menu.
Picture_2D => SubSetting => Password
Sets the password for entering advanced service menu. Default "0" means "0000".
EPA
Settings in this section define the default values for Standard picture mode. These items help to preserve the values in user Settings after entering the service menu.
Every software update resets the values in user Settings menu. Thus, it's a good idea to write them down before updating the software. To make it easier, I've created a table in Microsoft Excel format which includes separate settings for TV and HDMI1/2 sources (see attached "User Settings.xlsx").
There are many ways to control the TV: Infrared, Wi-Fi or LAN, HDMI-CEC. Each one has its own set of codes disclosed on different Internet sites. I've tested some of them, added HDMI-CEC messages, and packed them all into single archive (see attached "Key Codes.zip").
It's worth to note, that I've found HDMI-CEC to be the most reliable way of controlling the TV. For those who interested, see attached "USB-CEC Adapter - Review on Amazon.docx".
Finally, I've collected the extended information about my TV (chips, LCD panel, modules, etc). May be useful for DIY users and repair technicians (see attached "Technical Info.txt").
↧
↧
[D] General • ssiptv on UE40D7000
Hi everyone.
I am new to the forum, I apologize for my English, I know I speak it very badly.
I am looking for information to install ssiptv on my UE40D7000.
To be able to install ssiptv I know that I need to downgrade the firmware of my tv, I currently have the last one, 001033. Now I know I shouldn't have updated it, but it's done.
I think the downgrade step is necessary because in the samsung account it doesn't let me put "develop" as a username, it just allows me to put an email.
Can anyone help me take this first step?
I am new to the forum, I apologize for my English, I know I speak it very badly.
I am looking for information to install ssiptv on my UE40D7000.
To be able to install ssiptv I know that I need to downgrade the firmware of my tv, I currently have the last one, 001033. Now I know I shouldn't have updated it, but it's done.
I think the downgrade step is necessary because in the samsung account it doesn't let me put "develop" as a username, it just allows me to put an email.
Can anyone help me take this first step?
↧
[R/QR] General • Enable PVR on Q90R Series
Hello, I'm from Italy as well. I have a Q70 TV set and PVR is disabled only for our country.
I'm bound to think that the hardware is the same regardless of the destination country.
This said I have the same problem as gian12000.
I also tried to have the "local set" option come out since, regardless of the region I set, once I configure the TV from scratch, I can't select anything different from "Italy" when I am asked to input my country.
I have enabled the "extended" service menu (with the FACTORY + 3SPEED buttons) but still had no success.
I even managed to enable the "advanced" menu in the "extended" menu (pressing 0000 over it) and still I didn't get the "local set" setting to show.
Does anyone have any other hint to give us, poor Italians!?
Thanks in advance!
I'm bound to think that the hardware is the same regardless of the destination country.
This said I have the same problem as gian12000.
I also tried to have the "local set" option come out since, regardless of the region I set, once I configure the TV from scratch, I can't select anything different from "Italy" when I am asked to input my country.
I have enabled the "extended" service menu (with the FACTORY + 3SPEED buttons) but still had no success.
I even managed to enable the "advanced" menu in the "extended" menu (pressing 0000 over it) and still I didn't get the "local set" setting to show.
Does anyone have any other hint to give us, poor Italians!?
Thanks in advance!
↧
[M/Q] General • QE49Q7FAML (UK) usage in Germany
Thanks guys for your replies and opinios!
And yes - regarding TV standards Germany is more than slow. Most bigger TV stations are still using it.
And somehow I got used to it - For missed news programms or documentations...
This Q would be for my appartment at work (other city) - so it wouldn't be that bad if it didn't work.
OK and understand - Will see if I wanna play that game.![;)]( "Wink")
Looks like not many were waiting for Q/M root (according to downloads) - So there are not many testers...
And yes - regarding TV standards Germany is more than slow. Most bigger TV stations are still using it.
And somehow I got used to it - For missed news programms or documentations...
This Q would be for my appartment at work (other city) - so it wouldn't be that bad if it didn't work.
OK and understand - Will see if I wanna play that game.
Looks like not many were waiting for Q/M root (according to downloads) - So there are not many testers...
↧
[K] General • Smartview TV screen to Phone low range
Or shit in a bucket maybe? :p
↧
↧
BluRay Players • BD-H8900 reset to factory settings ?
Hello
My BD-H8900 just stopped booting properly. It only displays "HELLO" but no longer emits signal on HDMI output. I have checked that HDD is healthy (which stores lots of video I hope to play). I wonder if video processing or tuner is dead. It is still possible to put it down to sleep, try to wake up again, or open the BD drawer, either with hardware buttons or from remote control.
Is there a way to apply "reset to factory settings" under that conditions?
Is there any hope left to "do anything" with the device?
Thank you in advance for your help and advices
Yves
My BD-H8900 just stopped booting properly. It only displays "HELLO" but no longer emits signal on HDMI output. I have checked that HDD is healthy (which stores lots of video I hope to play). I wonder if video processing or tuner is dead. It is still possible to put it down to sleep, try to wake up again, or open the BD drawer, either with hardware buttons or from remote control.
Is there a way to apply "reset to factory settings" under that conditions?
Is there any hope left to "do anything" with the device?
Thank you in advance for your help and advices
Yves
↧
[N/QN] General • Firmware update
Подскажите, как можно получить доступ по кабелю rs232 to usb к serial eeprom. tv set 55nu8000 or update serial eeprom from service menu
↧
[H] General • Change motherboard on a bricked TV
Thank you so much for your help! You really made my day!
↧