Absolutely yes. But why? 32 from 40 differs only by one seting in service menu. I mean all 32 to 55 screens use same mainboard ![:)]( "Smile")
↧
[H] Hardware • H6400 Swap 32 inch mainboard into 40 inch
↧
[F] Software • [App] SamyGO RCremap for C/D(arm)/E/F/H with CMD support
if you try to bind a key to two commands: (or the command line is too long?)
rcSGOout:RCremap.log:librcremap.config:so i have to create some kind of wrapper script that calls the other scripts?
will it work if i use : "CMD:$SYSROOT/etc/init.d/myscript.sh" ? (or $DISTROOT)
rcSGOout:
SpoilerShow
CODE:
samyGOso v1.2.5 (c) bugficks 2013-2014, sectroyer 2014-2015Injecting '/mtd_rwcommon/SamyGO/opt/privateer/usr/libso/libRCremap.so' resident: '1'adding libc addr to found symaddress c81a0 + 42c2d000 42cf51a0mprotect: 0x42cf51a0dlopen: 0x41120a74dlclose: 0x41120c74dlsymaddr: 0x41120cd8pc=42a64158 lr=42a67928 sp=beaac8e0 fp=beaac934r0=fffffe00 r1=0r2=1 r3=0stack: 0xbea98000-0xbeaad000 length = 86016executing injection code at 0xbeaac790library injection completed!Succeeded.SpoilerShow
CODE:
# cat /dtv/RCremap.log [RCremap] SamyGO RCremap v0.3.5 log - (c) bugficks 2013, small fixes by sectroyer 2014[RCremap] mapping key: '3' to 'KEY'[RCremap] skipping invalid old key: '▒'[RCremap] Trying to get _ZN9KeyCommon17SendKeyPressInputEiis on C.[RCremap] Found _ZN9TDBuilder8GetTDiCPE16TDSourceObject_k location at: 0x002dd460[RCremap] Found _fini location at: 0x01aacb24[RCremap] text range: @0x0025d460 -> @0x0020d460[RCremap] rodata range: @0x01aacb24 -> @0x0a2acb24[RCremap] Found SendKeyPressInput at @0x0024546c[RCremap] SendKeyPressInput address: 0x0024546c[RCremap] _ZN9KeyCommon17SendKeyPressInputEiis address: 0x00245330[RCremap] 1 _ZN9KeyCommon17SendKeyPressInputEiis [0x245330].[RCremap] init done...SpoilerShow
CODE:
# cat /mtd_rwcommon/SamyGO/opt/privateer/usr/libso/libRCremap.config [ { "KEY_RED": "KEY_RED" }, { "KEY_YELLOW": "CMD:/mtd_rwcommon/SamyGO/etc/init.d/02_10_wakelan.init.dis start && /mtd_rwcommon/SamyGO/etc/init.d/06_07_touch_my_ip.init restart" }]will it work if i use : "CMD:$SYSROOT/etc/init.d/myscript.sh" ? (or $DISTROOT)
↧
↧
[C] Software • [App] samyGOrc for C series
with VALDEUC 3011
no reaction
SpoilerShow
CODE:
# ./samyGOrc -p `pidof exeDSP` -d 1 1 samyGOrc v0.7.1 (c) bugficks 2013 updated to work on C by sectroyer 2014symbol: mprotect -> @0x42cf51a0mprotect: 0x42cf51a0symbol: sleep -> @0x42cc4b40sleepaddr: 0x42cc4b40SHM, created: 0pc=42a64158 lr=42a67928 sp=be9838e0 fp=be983934r0=fffffe00 r1=0r2=2 r3=0stack: 0xbe96f000-0xbe984000 length = 86016executing injection code at 0xbe9837e4library injection completed!# ↧
[F] General • Smart iptv
http://siptv.eu/howto/sammy/ try this its works
↧
[M/Q] General • Kodi for Samsung MU6120
HI
Is any way to install kodi on Samsung MU6120?
Thanks.
Is any way to install kodi on Samsung MU6120?
Thanks.
↧
↧
[F] Software • [App] "Skype replacement" root E/F
This is not samygo related. I have this also. Don't know why this happens exactly. But this error is normally related to Samsung sever problems...kartu wrote:I also get "ERROR_MODEL_BIND" error (regardles of what I do, sometime after smart hub is loaded)
I found some Spanish posts on Samsung forum and asked there as well...
They said fw update would help.... Arg.
https://eu.community.samsung.com/t5/TV- ... 5144#M1662
But I didn't tried it yet...
Maybe Samsung is trying to push us to latest fw.... What the f...
As it looks like that happens only to older ES or EH models from 2012....
Any other idea is welcome....
↧
[K] Support • UKU6300 - USA - Enabled PVR w/ Region Change to Caribbe - Now no Bluetooth
Hi, did you ever find the solution? My k6300 Bluetooth and wifi doesn't work after enabling pvr. I can go back to USA setting and they work fine but obviously no pvr.
↧
[F] Software • [App] SamyGO STFU mod D(arm)/E/F
please 99_99_InfoBannerDuration.init download
↧
[H] Support • UA55HU9000 Service Menu ?
Ok. I have found the solution some may be looking for. The issue with some of these tvs, like mine, is that the little remote it came with functions on bluetooth only as well as the keyboard it came with. The mute 1 2 8 power command needs to be received by the tv using an infrared remote. The problem with some infrared universal remotes like my telus box remote is that the number buttons dont even emit a pulse when pushed until the tv is on. The only way i was able to enter the service menu was to use 2 different remotes. One for the mute and power button presses and another for the numbers. It worked like a charm on my samsung smart tv. There was no one remote that worked. Sometimes the best indication is the little led on your universal remote that blinks when you push a button. If thats blinking it should be putting out an infrared pulse. The only reason i was able to make sure my button pushes were actually being emitted from the remote is cause i have an infrared activated powerbar that has s light on it that blinks anytime it sees any kind of infrared light. If you have any questions ill gladly help!!
↧
↧
[J] Firmware • Firmware download list for J Series
Does anybody have any information if samsung plans to do a tizen upgrade on ueju6400 european modesl like they did during the summjer for us and uk ones , so you can get one year better smart hub programs choice! Thanks a lot
↧
[K] General • K Model Service Menu
↧
[J] Software • [FW 0000] T-HKMDEUC, T-HKMFDEUC, T-HKPDEUC, T-N14MJDEUC
hello guys, i just bought SAMSUNG UE55JS9000 with 1510 firmware. Is there any chance to downgrade it? Thanks in advance!
↧
[M/Q] General • app install by ip setting
Hi how can a install other apps by develop / ip setting like this
https://www.youtube.com/watch?v=n_YiRyEMOXI
thanks.
https://www.youtube.com/watch?v=n_YiRyEMOXI
thanks.
↧
↧
[D] Support • Updating components of SamyGO widget?
Well I've rewritten the whole Destroi program in C# but in Winforms instead of WPF just for programming experience and to get some of my features in - I tried hotpatching Destroi it self but I was too confused with the WPF environment as weird GUI bugs started appearing (like items on the list disappearing when pressing on them, all kinds of reference errors, the source was also pretty old so it needed manual edits to make it compile in modern VS2017)zoelechat wrote: ↑Tue Aug 01, 2017 5:31 pmI noticed myself that 1h disconnect (on E series, with brand new busybox!), not sure any fix has ever been found.
Not sure it has any effect, I've never been patient enough to wait another hour
8MB/s is expected since TV has got only (weak) 100Mb ethernet.
For both reasons, better focus on offline or realtime decrypting (don't ask me, I know nothing about D)
So I only included the realtime decrypting, and basically
I have now been able to workaround the timeout somehow, not even sure, by restarting the ftpclient and reconnecting each time I download a new file, so every time a new file is downloaded, the connection is closed completely, then fresh one is opened at the start of the foreach loop, versus previously using the same connection to download multiple files just like Destroi used.
I did see the new PVR download app, still I wanted to code and make it on my own so I kinda ignored it on purpose, it also says it's for E/F series and no mention for D Series, I might try it sometime later.
The system for practise is primairly meant to save size at parents place where I visit a few times a year and do some computer maintenance and stuff like this will help me automate this process a lot more faster, so I don't have to sit at the PC just downloading files one by one, the crucial thing I added was that it will detect files existing and will not overwrite them, Destroi overwritten anything without prompt by same name in the folder even if it was totall okay, I am using FileZilla to upload files to another HDD device, and I am also seeing disconnects when uploading, the same recorded files althought transcoded from the ridicolous 15 Megabit MPEGTS bitrate to much lower H264 bitrate but practically looks the same,
I did uncover something else at the very end when I finally got most of the program doe and focused on the actual download/decode part, I pinged it and occasionally every 30-50 minutes a big spike would occur, around 1300-4000 miliseconds of delay, for just one packet, however averaging at 14 ms when transferring files (it's LAN, so it's 1ms when no transfer)
-----------------------------------
But I'm looking at busybox binaries and it seems like there's no FTP inside the bigger 1.35 MB official busybox, the SamyGo busybox seem to be the one holding the actual FTP server.
↧
[M/Q] General • Pip and wake up on MU6172 series
I test now and this method not switch my tv mu6172 from standby to power on!!!
But after i make power on, then tv switch to selected channel.
This is bug or feature?
But after i make power on, then tv switch to selected channel.
This is bug or feature?
↧
[H] General • Is there any Chance that H Series TV decodes AC3/DTS 5.1 via HDMI?
Does a "Hack" exist, that lets my H-Series TV accept AC3 5.1 via HDMI, decodes it and outputs it over the internal TV Speakers (like it is done with the internal Media Player)?
If yes, what exactly do i have to do.
Thx.
If yes, what exactly do i have to do.
Thx.
↧
[H] General • Need Plex App 2.007
I tried to install /w sammyWidgets, but the TV said it was not success.
Develop mode, auto update OFF, Start Sammy Widget, connecet tv to PC's IP, TV donwloaded the app but could not install.
Any idea?
thx
Develop mode, auto update OFF, Start Sammy Widget, connecet tv to PC's IP, TV donwloaded the app but could not install.
Any idea?
thx
↧
↧
[D] Software • [PC] SMPVRDLDE - An OTF Decrypt PVR Downloader - D Series
Hello
So I was looking to get better at programming C# and other things and I a great opportunity came up that I would just rewrite the whole Destroi program from scratch myself.
This may seem to be late to the party, but actually not everyone replaces their electronics every 2-3 years so one of the TVs that my parents use for recording is the EU version of the D7650 model. Since I have experience with transcoding from the past and other things, I figured I can do something about the overkill of the official DVB-C MPEG2-TS bitrate that comes from the ISP. So this setup of using a larger HDD for recordings and a smaller HDD for normal videos but actually putting transcoded recordings on there is a really fast way of not deleting them while relieving the space on the XFS recording device.
Because of the 1 hour disconnect issue and the fact that Destroi auto-overwritten the files, I had to extend my visit to basically as if I moved back for a while and fiddle with the sorting of files and sitting through making sure Destroi was working, it was heavily affecting multitasking, so I had to do something about it.
Infact, I actually tried hotfixing the Destroi source, but I got frustrated with the WPF environment, getting it to compile took a few days, then weird bugs started appearing with the GUI that I had no idea how to fix, not only that, I had a real trouble navigating and understanding the source code it self, however since SMPVRDLDE is based on Destroi I had to figure out the whole pipeline and from WPF to Winforms is not easy at all considering I had little idea about WPF and C# in general.
While it's not completely finalized, I decided I would took a few hours and just make the initial release right now when I had all of this fresh in my head, I rather make the thread right now.
Source is also provided because it's probably a requirement, while it's completely rewritten it was still semi-recycling Destroi code, the core meat of it still uses most Destroi components.
SMPVRDLDE Version 0.9.0 - Initial Release Changes Versus Destroi 1.3.3:
So I was looking to get better at programming C# and other things and I a great opportunity came up that I would just rewrite the whole Destroi program from scratch myself.
This may seem to be late to the party, but actually not everyone replaces their electronics every 2-3 years so one of the TVs that my parents use for recording is the EU version of the D7650 model. Since I have experience with transcoding from the past and other things, I figured I can do something about the overkill of the official DVB-C MPEG2-TS bitrate that comes from the ISP. So this setup of using a larger HDD for recordings and a smaller HDD for normal videos but actually putting transcoded recordings on there is a really fast way of not deleting them while relieving the space on the XFS recording device.
Because of the 1 hour disconnect issue and the fact that Destroi auto-overwritten the files, I had to extend my visit to basically as if I moved back for a while and fiddle with the sorting of files and sitting through making sure Destroi was working, it was heavily affecting multitasking, so I had to do something about it.
Infact, I actually tried hotfixing the Destroi source, but I got frustrated with the WPF environment, getting it to compile took a few days, then weird bugs started appearing with the GUI that I had no idea how to fix, not only that, I had a real trouble navigating and understanding the source code it self, however since SMPVRDLDE is based on Destroi I had to figure out the whole pipeline and from WPF to Winforms is not easy at all considering I had little idea about WPF and C# in general.
While it's not completely finalized, I decided I would took a few hours and just make the initial release right now when I had all of this fresh in my head, I rather make the thread right now.
Source is also provided because it's probably a requirement, while it's completely rewritten it was still semi-recycling Destroi code, the core meat of it still uses most Destroi components.
SMPVRDLDE Version 0.9.0 - Initial Release Changes Versus Destroi 1.3.3:
- - Initial changes are suited only for my needs/liknesses - currently meant only for D-Series, but it could work for C-Series as well, tester welcome, if it's an easy fix I could do it.
- - Switched to Winforms - Initial release requires .NET Framework 4.7 Client -- Offline Installers (Available on Win7, Win 8.1 and Win10)
- - The whole program was designed to be simplified in terms of threading so that any bugs from that are completely avoided.
- - Dynamic (threaded) operations removed, the program will not connect or do anything until you set all your options and manually start the process.
- - The GUI is totally different, designed around the 1440p resolution and not meant to be resized, most options are not editable after the first step has been started.
- - Extensive operation messaging is provided in the status ouput box.
- - KeyRetMethod is MDB only, DRMGet is not implemented and will probably not be, I think telnet doesn't even work on my TV.
- - Removed offline decryption - this tool is On-The-Fly only - decrypting while downloading.
- - It will not list all recordings on all devices, you either manually select a specific device, or only the first device with recordings will be automatically selected.
- - Will not auto-overwrite existing downloads unless enabled in options, but it has the ability to check if an existing file is valid (partial), if it's not the correct size, only then it will redownload it and overwrite.
- - The ~1 hour disconnect issue has strangely disappeared accidentially while fixing something else, but it may not be a guarantee.
- - Implementing selection through the listview - initial release 0.9.0 has manual index only.
- - Finishing Restart Download Queue feature to work correctly - disabled in 0.9.0
- - Output Option to skip downloading INF files.
- - Output Option to replace filename spaces with _
- - Output Option to backup(move) the recording that exists locally but was marked for redownload with overwrite.
- - Further fixes for progress bar indications not being shown accurately under certain circumstances (problematic in winforms it self)
- - This is not a complete list.
- - Non-Critical unhandled exception when backspacing the last number in the FTP Connection textboxes.
- - Some minor issues at selection of the input device when using automatic initially, it will show an erorr, already know what is wrong just don't have time to fix now, just type the name of the PVR device name manually for now.
↧
[D] Firmware • TV D-Series Firmware Downgrade (SamyGO Proof of Concept)
I need help with DNS downgrade on my UE376530 from 1028.
Does it still work by DNS?
Or do I have to go over the hospital variant, because I would need the company goods 10 ..
Thank you
60plus
Does it still work by DNS?
Or do I have to go over the hospital variant, because I would need the company goods 10 ..
Thank you
60plus
↧
[K] General • Freesat
Hi,
It seems that my UE55KU6400 is freesat capable, but I cant seem to make it register UK only. The select your country only shows france (where i am and I bought it).
Any chance I can flash the firmware with the uk version to have freesat somehow?
Thanks,
Jim.
It seems that my UE55KU6400 is freesat capable, but I cant seem to make it register UK only. The select your country only shows france (where i am and I bought it).
Any chance I can flash the firmware with the uk version to have freesat somehow?
Thanks,
Jim.
↧