hope someone helping me, please
↧
[J] Support • Front Color UE40JU6470
↧
[E] Hardware • UE40ES6710 successful upgrade: DVB-T to DVB-T2
Hi!
I want to report that I finally replaced the tuner in my old ES8000 tv-set. It took me two hours to remove the old tuner (40 legs) from the mainboard but finally won (I am not an expert in unsoldering; I bought a 13 EUR unsolderpump on Amazon for this task). I put in the replacement part BN40-00238b. After switching on the TV it automatically recognized the new tuner in service menu. DVB-T2 is now supported and running perfectly. No need to purchase a new one when you one require H.264!
Good luck to others!
I want to report that I finally replaced the tuner in my old ES8000 tv-set. It took me two hours to remove the old tuner (40 legs) from the mainboard but finally won (I am not an expert in unsoldering; I bought a 13 EUR unsolderpump on Amazon for this task). I put in the replacement part BN40-00238b. After switching on the TV it automatically recognized the new tuner in service menu. DVB-T2 is now supported and running perfectly. No need to purchase a new one when you one require H.264!
Good luck to others!
↧
↧
[H] Support • Please Help with Samsung UN40EH5300F
Try: info+menu+mute+power
CODE:
http://www.askvg.com/secret-service-codes-for-sony-and-lg-tv/↧
[F] Software • [App] Rooting E/F on latest firmwares
If I have a TV routed then why SamygoPVR Decoder does not detect tv? The TV is connected to the same network as the computer.
↧
[K] General • UE43KU6402UXXH satellite search?
Hi friends,
I'm new in TVs, I bought a UE43KU6402U and wanted to connect to a satellite dish with diseqc 1.2 13'-16' but in broadcast menu it does not give me access to search. Any idea how to do it?
Thnx in advance
I'm new in TVs, I bought a UE43KU6402U and wanted to connect to a satellite dish with diseqc 1.2 13'-16' but in broadcast menu it does not give me access to search. Any idea how to do it?
Thnx in advance
↧
↧
[K] Firmware • Firmwares update to 1168.2 released by Samsung on 30.03.2017
Today Samsung published new firmwares version 1168.2
Download links:
T-JZMDEUC
T-HKMFKDEUC
Download links:
T-JZMDEUC
T-HKMFKDEUC
CODE:
upgrade type: USBmajor version: 1168minor version: 2model string: T-JZMDEUCimage: rel-tztv-2.4-trunk2016-dvb-rca-jazz-m_20170316.2gendate: 20170316imgdate: 17031602release name: SWU-OU_T-JZMDEUC-1168-170316-Releasefirm code: SWU-OU_T-JZMDEUC_1168_170316firm version: 1168.170316used key type : 2016_Jazz_REL_EncryptKey / 2016_Jazz_REL_RSAKeytool version: 6.7.8 / 98893ee0e100681b6b9ebb30c5f5bf28c028e1ae / downloaded: 2016.12.28-13:50:12pinfo: 01020304050607080910121314151819CODE:
upgrade type: USBmajor version: 1168minor version: 2model string: T-HKMFKDEUCimage: rel-tztv-2.4-trunk2016-dvb-rca-hawk-m-fhd_20170316.2gendate: 20170316imgdate: 17031602release name: SWU-OU_T-HKMFKDEUC-1168-170316-Releasefirm code: SWU-OU_T-HKMFKDEUC_1168_170316firm version: 1168.170316used key type : 2016_Hawk-M_REL_EncryptKey / 2016_Hawk-M_REL_RSAKeytool version: 6.7.8 / 98893ee0e100681b6b9ebb30c5f5bf28c028e1ae / downloaded: 2016.12.28-13:50:12pinfo: 0102030506070809111214152223↧
[D] Support • FTP Disabled...
TV: UE40D8000
So I just installed SamyGO on my Samsung TV using this Tutorial: https://wiki.samygo.tv/index.php?title= ... cpu_models and 2 new Applications seemed to have been installed, 'SamyGO' and 'ChannelInfo'. As the tutorial told me to, I opened SamyGO, and the screen just went black for a second and went back to the SmartHub menu, just where it was.
So I then tried connecting to my Samsung TV's IP Address (192.168.1.21) with the port 21 via FTP with the username 'root' and the password [blank]. But it didn't work. I got this error message by my FTP Client: "Connection refused. The connection attempt was rejected. The server may be down, or your network may not be properly configured."
I even ran an nmap port scan on 192.168.1.21 (my TV's IP Address) and it seems like only port 9090 is enabled ("9090/tcp open zeus-admin"). I did not see port 21 or any other port open on my TV's IP Address. (When I turn off the TV and run a port scan using nmap it shows me that the IP is not up/online, so 192.168.1.21 IS my TV's IP)
I tried turning off and on my TV multiple times but I can't seem to connect, wether I open SamyGO up or not. It doesn't seem to work...
So I just installed SamyGO on my Samsung TV using this Tutorial: https://wiki.samygo.tv/index.php?title= ... cpu_models and 2 new Applications seemed to have been installed, 'SamyGO' and 'ChannelInfo'. As the tutorial told me to, I opened SamyGO, and the screen just went black for a second and went back to the SmartHub menu, just where it was.
So I then tried connecting to my Samsung TV's IP Address (192.168.1.21) with the port 21 via FTP with the username 'root' and the password [blank]. But it didn't work. I got this error message by my FTP Client: "Connection refused. The connection attempt was rejected. The server may be down, or your network may not be properly configured."
I even ran an nmap port scan on 192.168.1.21 (my TV's IP Address) and it seems like only port 9090 is enabled ("9090/tcp open zeus-admin"). I did not see port 21 or any other port open on my TV's IP Address. (When I turn off the TV and run a port scan using nmap it shows me that the IP is not up/online, so 192.168.1.21 IS my TV's IP)
I tried turning off and on my TV multiple times but I can't seem to connect, wether I open SamyGO up or not. It doesn't seem to work...
↧
[F] Support • 22F5400 no telnet no VUSB and no remote working.
My F8000 is now rebooting after every 3 minutes just 10 seconds after the last init is completed.
All .log files are deleted.
I have also blocked the Root by removing the tick in the autorun.
I really do not know what else to do.
It started to do like this only today.
All .log files are deleted.
I have also blocked the Root by removing the tick in the autorun.
I really do not know what else to do.
It started to do like this only today.
↧
[H] Software • [APP] ffmpeg w/ srf decryption and hw aes [E/F/(H)/J/K]
Ok thanks for your answer bugficks!
↧
↧
[H] General • Skype app will not be available
↧
[E] Firmware • Is it ok to flash UA40ES6600M firmware on UA40ES6600R?
If your fw is T-MST10PDAAC that's all you can install, simple as that. Anyway if you try to install non-suitable fw, TV will just tell no upgrade found, absolutely no risk then.
↧
[H] Support • Problem with initialization of CI+ module
I'm using an Alphacrypt CI module flashed with an One4All firmware on a H6270 tv.
While this works fine most of the times, the tv sometimes won't properly initialize the CI module and just bring up an error message. However, when I simple restart the tv, the module works fine again.
Is there some kind of setting in the service menu, which might help with this? Maybe a fast boot option that somehow screws with the CI initialization process?
While this works fine most of the times, the tv sometimes won't properly initialize the CI module and just bring up an error message. However, when I simple restart the tv, the module works fine again.
Is there some kind of setting in the service menu, which might help with this? Maybe a fast boot option that somehow screws with the CI initialization process?
↧
[E] Support • Bluethooth headphones to ES6900
Quite the opposite, much discussed issue ![:)]( "Smile")
Mostly no luck on E-MST though, you'll find all known clues there:
viewtopic.php?f=53&t=5835&&start=40
Mostly no luck on E-MST though, you'll find all known clues there:
viewtopic.php?f=53&t=5835&&start=40
↧
↧
[J] General • J Rooting.
I can also help. Fw 1470
↧
[F] Support • Need help with my Samsung LED 32 Inch - Smart TV - UA32F5500
After I turned on TV and remote led sensor blinking 5times. Backlight does not work .I found one bad led bulb and power supply is ok. it's open circuit. So I shorted circuit of a bad led bulb. it's work again. I don't have spare led bulbs and Bulb Led can be found at a TV repair shop . https://www.youtube.com/watch?v=eEJoPCa7Kt0 (How to test led bulbs)
↧
[D] Firmware • Downgrade request - UN40D6500VM - GASDAAC
Bump. Could anyone please give me some help?
↧
[D] Firmware • TV D-Series Firmware Downgrade (SamyGO Proof of Concept)
Hello
I'm getting also a 601 error when trying to run the software update
Can you provide any info about it?
Thanks!
I'm getting also a 601 error when trying to run the software update
Can you provide any info about it?
Thanks!
↧
↧
[F] Software • [App] Rooting E/F on latest firmwares
Hi
I have ES8000 with FW: T-ECPUABC-103.0
I put all the files with exact procedures that's been described in the usb, and after I connect it to the tv, as soon as I open up smart hub it goes to update automatically and after update, smart hub's main window shows up with no sign of Samygo. I'm confused, did I miss something?
I have ES8000 with FW: T-ECPUABC-103.0
I put all the files with exact procedures that's been described in the usb, and after I connect it to the tv, as soon as I open up smart hub it goes to update automatically and after update, smart hub's main window shows up with no sign of Samygo. I'm confused, did I miss something?
↧
[H] General • New rooting method in the wild
↧
[F] Software • [App] "Skype replacement" root E/F
Any help please !! In addition, FTP is working, so the root is here, but SamyGo doesn't work !! Thanks in advance !!Guantanamo wrote: ↑Sun Mar 26, 2017 2:19 pmHi all,
Before all, Thanks for all the work done on SamyGo.
I have a Samsung UE40F6400 on version 1120, managed to dowgrade it to 1119, latest firmware with rooting skype replacement method as I see, so I did the steps and got the root done, but now, SamyGo don't start and I see on SmartHub SamyGo Uninstall and SmgRestore, nothing else (except my other apps).
My question is, what you think I did wrong or I've missed, and why SamyGo don't start.
Thanks for all.
↧
