Ok, was just in case you missed it, I've got no idea if it's disable-able otherwise.
↧
[K] General • K Model Service Menu
↧
[E] Support • Smart HUB updates
I tried already different Versions. I have a ue55es8090. Currently i have the 2003 version.
It hangs for a while not responding to the smarthub button, then reboots, turning off then on, on its own. Then it hangs again, telling me it's updating if the smarthub button is pressed, which takes anywhere from 1 to 15 minutes!!! Then it reboots itself again, and THEN goes to the smarthub when the button is pressed. But yes, it seems to completely reinstall the entire smarthub update and who knows what else, every...single...time the TV is turned on. Freezes when changing TV channel the switches off and on again. Loading icon for smart hub (sic) freezes and TV turns off and on again. Click smart hub start and says updating.![:o]( "Surprised")
ops
It hangs for a while not responding to the smarthub button, then reboots, turning off then on, on its own. Then it hangs again, telling me it's updating if the smarthub button is pressed, which takes anywhere from 1 to 15 minutes!!! Then it reboots itself again, and THEN goes to the smarthub when the button is pressed. But yes, it seems to completely reinstall the entire smarthub update and who knows what else, every...single...time the TV is turned on. Freezes when changing TV channel the switches off and on again. Loading icon for smart hub (sic) freezes and TV turns off and on again. Click smart hub start and says updating.
ops↧
↧
[E] General • Help UE40ES6800 root and ftp telnet
Hello, can anyone tell me the settings (folders, files) for tv UE40ES6800?
T-MST10PDEUC - 1029.0
T-MST10PDEUS - 1001
ONT Support OFF
Watchdog OFF
With this configuration I have FTP access but telnet NOK
1. Unpack SamyGO_data_E.zip to FAT32 USB (download here download / file.php? Id = 4566)
2. Extract SamyGO.zip find file samyext4.img and copy file samyext4.img to folder SamyGO_data on FAT32 USB (download here: http: //download.samygo.tv/F%20Series/Widgets/SamyGO.zip)
3. Copy file 128mb.xfs to folder SamyGO_data on FAT32 USB (Download here https://www.sendspace.com/file/el3xm8)
4. Unpack SamyGO-F-SM-MST-Fix-USB to FAT32 USB (Download here download / file.php? Id = 4534)
5. Connect USB to TV
I also tested with this:
For E SERIES !!!! Do this:
* E-MST users, better go there.
Unpack attached SamyGO_data_E.zip to FAT USB
Download 128mb.xfs from: https://www.sendspace.com/file/el3xm8 or get it from / data folder of this archive
Copy file 128mb.xfs to folder SamyGO_data on FAT USB
Unpack SamyGO-F-SM-AutoStart-USB to FAT USB
Now you should have FAT USB with two folders: SamyGO-F and SamyGO_data
Connect to TV
Launch SamyGO-F from SmartHub (if it does not appear after TV reboot). Sometimes it is necessary to connect USB WHILE TV IS OFF !!!
The widget will automatically finish installation (and does not need to push any buttons) and close itself
Now SamyGO is started and telnet / ftp / etc. Should work
If ever installation widget restarts endlessly: Leave your SamyGO_data as it is but put there some (any) file named samyext4.img and try F-MST method. It might help.
To enable AutoStart reboot TV and from Main Menu -> Smart Features -> Apps Settings -> Auto Ticker -> SamyGO_AutoStart
In case of problems please check NETcat (NOT Ncat and NOT telnet) on ports 3023, 3123, 4023, 4123, 5023, 5123 and report result
But it does not work.
If you can help me, thank you.
T-MST10PDEUC - 1029.0
T-MST10PDEUS - 1001
ONT Support OFF
Watchdog OFF
With this configuration I have FTP access but telnet NOK
1. Unpack SamyGO_data_E.zip to FAT32 USB (download here download / file.php? Id = 4566)
2. Extract SamyGO.zip find file samyext4.img and copy file samyext4.img to folder SamyGO_data on FAT32 USB (download here: http: //download.samygo.tv/F%20Series/Widgets/SamyGO.zip)
3. Copy file 128mb.xfs to folder SamyGO_data on FAT32 USB (Download here https://www.sendspace.com/file/el3xm8)
4. Unpack SamyGO-F-SM-MST-Fix-USB to FAT32 USB (Download here download / file.php? Id = 4534)
5. Connect USB to TV
I also tested with this:
For E SERIES !!!! Do this:
* E-MST users, better go there.
Unpack attached SamyGO_data_E.zip to FAT USB
Download 128mb.xfs from: https://www.sendspace.com/file/el3xm8 or get it from / data folder of this archive
Copy file 128mb.xfs to folder SamyGO_data on FAT USB
Unpack SamyGO-F-SM-AutoStart-USB to FAT USB
Now you should have FAT USB with two folders: SamyGO-F and SamyGO_data
Connect to TV
Launch SamyGO-F from SmartHub (if it does not appear after TV reboot). Sometimes it is necessary to connect USB WHILE TV IS OFF !!!
The widget will automatically finish installation (and does not need to push any buttons) and close itself
Now SamyGO is started and telnet / ftp / etc. Should work
If ever installation widget restarts endlessly: Leave your SamyGO_data as it is but put there some (any) file named samyext4.img and try F-MST method. It might help.
To enable AutoStart reboot TV and from Main Menu -> Smart Features -> Apps Settings -> Auto Ticker -> SamyGO_AutoStart
In case of problems please check NETcat (NOT Ncat and NOT telnet) on ports 3023, 3123, 4023, 4123, 5023, 5123 and report result
But it does not work.
If you can help me, thank you.
↧
[E] Support • Help UE40ES6800 telnet nok
Hello, can anyone tell me the settings (folders, files) for tv UE40ES6800?
T-MST10PDEUC - 1029.0
T-MST10PDEUS - 1001
ONT Support OFF
Watchdog OFF
With this configuration I have FTP access but telnet NOK
1. Unpack SamyGO_data_E.zip to FAT32 USB (download here download / file.php? Id = 4566)
2. Extract SamyGO.zip find file samyext4.img and copy file samyext4.img to folder SamyGO_data on FAT32 USB (download here: http: //download.samygo.tv/F%20Series/Widgets/SamyGO.zip)
3. Copy file 128mb.xfs to folder SamyGO_data on FAT32 USB (Download here https://www.sendspace.com/file/el3xm8)
4. Unpack SamyGO-F-SM-MST-Fix-USB to FAT32 USB (Download here download / file.php? Id = 4534)
5. Connect USB to TV
I also tested with this:
For E SERIES !!!! Do this:
* E-MST users, better go there.
Unpack attached SamyGO_data_E.zip to FAT USB
Download 128mb.xfs from: https://www.sendspace.com/file/el3xm8 or get it from / data folder of this archive
Copy file 128mb.xfs to folder SamyGO_data on FAT USB
Unpack SamyGO-F-SM-AutoStart-USB to FAT USB
Now you should have FAT USB with two folders: SamyGO-F and SamyGO_data
Connect to TV
Launch SamyGO-F from SmartHub (if it does not appear after TV reboot). Sometimes it is necessary to connect USB WHILE TV IS OFF !!!
The widget will automatically finish installation (and does not need to push any buttons) and close itself
Now SamyGO is started and telnet / ftp / etc. Should work
If ever installation widget restarts endlessly: Leave your SamyGO_data as it is but put there some (any) file named samyext4.img and try F-MST method. It might help.
To enable AutoStart reboot TV and from Main Menu -> Smart Features -> Apps Settings -> Auto Ticker -> SamyGO_AutoStart
In case of problems please check NETcat (NOT Ncat and NOT telnet) on ports 3023, 3123, 4023, 4123, 5023, 5123 and report result
But it does not work.
If you can help me, thank you.
T-MST10PDEUC - 1029.0
T-MST10PDEUS - 1001
ONT Support OFF
Watchdog OFF
With this configuration I have FTP access but telnet NOK
1. Unpack SamyGO_data_E.zip to FAT32 USB (download here download / file.php? Id = 4566)
2. Extract SamyGO.zip find file samyext4.img and copy file samyext4.img to folder SamyGO_data on FAT32 USB (download here: http: //download.samygo.tv/F%20Series/Widgets/SamyGO.zip)
3. Copy file 128mb.xfs to folder SamyGO_data on FAT32 USB (Download here https://www.sendspace.com/file/el3xm8)
4. Unpack SamyGO-F-SM-MST-Fix-USB to FAT32 USB (Download here download / file.php? Id = 4534)
5. Connect USB to TV
I also tested with this:
For E SERIES !!!! Do this:
* E-MST users, better go there.
Unpack attached SamyGO_data_E.zip to FAT USB
Download 128mb.xfs from: https://www.sendspace.com/file/el3xm8 or get it from / data folder of this archive
Copy file 128mb.xfs to folder SamyGO_data on FAT USB
Unpack SamyGO-F-SM-AutoStart-USB to FAT USB
Now you should have FAT USB with two folders: SamyGO-F and SamyGO_data
Connect to TV
Launch SamyGO-F from SmartHub (if it does not appear after TV reboot). Sometimes it is necessary to connect USB WHILE TV IS OFF !!!
The widget will automatically finish installation (and does not need to push any buttons) and close itself
Now SamyGO is started and telnet / ftp / etc. Should work
If ever installation widget restarts endlessly: Leave your SamyGO_data as it is but put there some (any) file named samyext4.img and try F-MST method. It might help.
To enable AutoStart reboot TV and from Main Menu -> Smart Features -> Apps Settings -> Auto Ticker -> SamyGO_AutoStart
In case of problems please check NETcat (NOT Ncat and NOT telnet) on ports 3023, 3123, 4023, 4123, 5023, 5123 and report result
But it does not work.
If you can help me, thank you.
↧
BluRay Players • [App] Removing Cinavia on E/F Bluray players
Hi all, recently my cinavia autostart won't run at all. The files are there, all are in 777 mode and when I start them manually i.e. /mtd_rwcommon/SamyGO_mount/etc/init.d/99_99_Cinaviapatch.init then it works... but it won't start by itself?! Any ideas?
↧
↧
[J] Firmware • Firmware downgrade for J Series
No need to pollute every thread. You can't downgrade.
↧
[F] Software • [APP] GVFS (WebDav,SMB,NFS,FTP)
GVFS - GNU Virtual Filesystem
Hey Guys,
I want to share with you the GVFS, I compiled for my F-Series TV.
I created it because I was searching for a way to mount WebDav, which has kindof streaming support. With davfs2 and fusedav this wasn't possible, but gvfs seems to be able to play video files in a kindof streaming way.
This GVFS was compiled with Samba (smb), WebDav (dav/davs) and NFS Support. Additionally FTP (ftp, ftps, sftp) should also work.
Even though I was only able to test it on my UE40F6340 / UE32F6270, there is a chance it could also work on E- Series or H-Series.
Additionally I also created a mips Version which is completely untested.
Instructions can be found here:
Howto install
Downloads are here:
arm_v7_vfp_le-gvfs-1.0RC1.zip
mips24ke_nfp_be-gvfs-1.0RC1.zip
Hey Guys,
I want to share with you the GVFS, I compiled for my F-Series TV.
I created it because I was searching for a way to mount WebDav, which has kindof streaming support. With davfs2 and fusedav this wasn't possible, but gvfs seems to be able to play video files in a kindof streaming way.
This GVFS was compiled with Samba (smb), WebDav (dav/davs) and NFS Support. Additionally FTP (ftp, ftps, sftp) should also work.
Even though I was only able to test it on my UE40F6340 / UE32F6270, there is a chance it could also work on E- Series or H-Series.
Additionally I also created a mips Version which is completely untested.
Instructions can be found here:
Howto install
Downloads are here:
arm_v7_vfp_le-gvfs-1.0RC1.zip
mips24ke_nfp_be-gvfs-1.0RC1.zip
↧
[H] General • Older Version of T-GFSDEUC (before 1310)
http://downloadcenter.samsung.com/conte ... 1230.4.exe
That one you can disable OTN support in service menu (not greyed yet) to avoid any future unwanted upgrade...
That one you can disable OTN support in service menu (not greyed yet) to avoid any future unwanted upgrade...
↧
[M/Q] General • KantM sources available
Grab here: http://opensource.samsung.com/reception ... h_id=18529 ![:)]( "Smile")
17_KantM.zip ~2Gb
http://opensource.samsung.com/reception ... alue=KantM
17_KantM.zip ~2Gb
http://opensource.samsung.com/reception ... alue=KantM
↧
↧
[J] General • J Rooting.
WHEN it was blocked ?
And check release date of your FW, if BEFORE May it should work ↧
[F] General • SSH AND TELNET NOT WORKING
Hello, I have this serie F smartv UE4656400 T-MST12DEUC-2126.0 ,BT-G, i haave install samygo, and try everithig and ssd and telnet not working, ftp is ok, can anynone help me ?
i have other smartv ES8000 and samygo work ok....
i have other smartv ES8000 and samygo work ok....
↧
[D] Firmware • TV D-Series Firmware Downgrade (SamyGO Proof of Concept)
For D series arm you can apply Hospitality mode method to get root on latest firmwares.
↧
[C] Support • unbrick PS42C435A1WXXE ?
okay so i got a tv from a friend that is bricked he told me he had used some img file from samygo ?
and i wonder if it is possible to unbrick and how
its a plasmatv
model PS42C430
he said that the firmware was T-TDT5DEUC-1018.0 before he bricked it
i read on the wiki that it may be possible to unbrick with exlink cable ?
---------------------------------------
what happens when i try to turn it on is that it ticks (startup tick)
then it double ticks (turn off and on)
and continue like that in a loop
i thought it could be fixed by downloading firmware to usb and hold exit on startup but nope did not work
-----------------------------------------
so could someone tell me more details on unbricking with a exlink cable (like how or some other way of unbricking )
oh and if it is possible to unbrick with a some sort of hhardware flasher then tell me
i dont own any cables now but i will buy then soon
--------------
all help is appreciated
and i wonder if it is possible to unbrick and how
its a plasmatv
model PS42C430
he said that the firmware was T-TDT5DEUC-1018.0 before he bricked it
i read on the wiki that it may be possible to unbrick with exlink cable ?
---------------------------------------
what happens when i try to turn it on is that it ticks (startup tick)
then it double ticks (turn off and on)
and continue like that in a loop
i thought it could be fixed by downloading firmware to usb and hold exit on startup but nope did not work
-----------------------------------------
so could someone tell me more details on unbricking with a exlink cable (like how or some other way of unbricking )
oh and if it is possible to unbrick with a some sort of hhardware flasher then tell me
i dont own any cables now but i will buy then soon
--------------
all help is appreciated
↧
↧
[F] Brainstorm • PVR over samba
Hello
Will the E series work with PVR on SAMBA?
Will the E series work with PVR on SAMBA?
↧
General • Panasonic forum
↧
[K] Support • Change/Reinstall Demo Video on TV
Thanks for solution! ![:)]( "Smile")
↧
[E] General • UE46ES8000 & Sek-1000
Guy's Please Help.
that my first post so I'm really sorry if it's in the wrong place.
I bought a SEK-1000 for my ES8000 but it doesn't work,
when plugged Tv recognize it but after 100% I received message "No Updates files found on your USB device, Please Check it and try again"
I make a software downgrade from 2022 to 2009.2 still no successful. tried boot tv together with plugged USB with many versions of software:
E-Kit
SWU_T-ECPAKUC_001054
TB-FXPDEUC_1016.1
T-ECPDEUC_2009.2
T-ECPDEUC_2022.0
still nothing.
tried Factory Reset no helping.
when I opened Evolution Kit in the USB position at allshare/samsung Link
i find out that there is a TB-FXPAKUC software with image catalog inside,
I'm sure you're all more smarter then me hopefully someone can help me.
my SEK-1000 is a ZX version if it's help or making any difference.
sorry for my English
Regards
that my first post so I'm really sorry if it's in the wrong place.
I bought a SEK-1000 for my ES8000 but it doesn't work,
when plugged Tv recognize it but after 100% I received message "No Updates files found on your USB device, Please Check it and try again"
I make a software downgrade from 2022 to 2009.2 still no successful. tried boot tv together with plugged USB with many versions of software:
E-Kit
SWU_T-ECPAKUC_001054
TB-FXPDEUC_1016.1
T-ECPDEUC_2009.2
T-ECPDEUC_2022.0
still nothing.
tried Factory Reset no helping.
when I opened Evolution Kit in the USB position at allshare/samsung Link
i find out that there is a TB-FXPAKUC software with image catalog inside,
I'm sure you're all more smarter then me hopefully someone can help me.
my SEK-1000 is a ZX version if it's help or making any difference.
sorry for my English
Regards
↧
↧
[J] Support • recording auto erase
Hello
I have records in my hard drive that fades with my Samsung TV from time to time. what to do ?
I have records in my hard drive that fades with my Samsung TV from time to time. what to do ?
↧
[E] Software • *** Requests for apps/patches E series ***
My E series TV displays a message that the YouTube widget will be removed on June 30th. Is there a way to reinstall the app?
↧
[K] General • Rooting LATEST K series?
Hi all,
Any update/progress? I am ready for alpha/beta testing![:)]( "Smile")
Cheers
Any update/progress? I am ready for alpha/beta testing
Cheers
↧