[F] Software • [App] Rooting E/F on latest firmwares

CODE:

1) Identify the TV's firmware version by acessing the "Extended Service Menu". Follow the steps below to do it:Turn the power off. On the remote, press Mute followed by 1, 8, 2, Power in sequence. (site: http://factory-reset.com/wiki/Samsung_Service_Menu).2) The TV should display the menu as described on this image. Take note of the firmware name. The important thing to know if whether it contains MST or not. The sample image displays T-MST12UABC-1121.1: https://goo.gl/photos/aCkjcchqTQeUhCZK93) Disable the OTN Support: On the "Extended Service Menu" (step #1 above), go to the Menu "Option", then "MRT Option", and change "OTN Support" to off4) Format a USB drive using FAT5) Download and unzip the file SamyGO_data.zip from https://forum.samygo.tv/download/file.php?id=76706) Download and unzip the file samyext4.img.F.zip from https://www.dropbox.com/s/i6v2sus8kd18xfv/samyext4.img.F.zip?dl=07) Copy file samyext4.img to the folder SamyGO_data that was unziped on step #5.8) Download and unzip the file from https://forum.samygo.tv/download/file.php?id=7533.7) At this point you should have 2 folders in your computer: SamyGO-F-SM-MST-Fix and SamyGO_data. Copy both of them to the your USB drive formatted on step #48) Connect your TV to the internet using a ETHERNET cable (it does not work with wi-fi)9) Connect the USB drive in your TV10) Click on the Smart HUB button on your remote controller and go to "More Apps" when the screen loads11) At this point you should see the widget "SamyGO-F-SM-MST-Fix". If you don't, repeat the steps 9 and 10 after restarting your TV12) The widget will automatically start and finish the installation and will ask you to restart the TV when it finishes. Here is a picture of the process when it is done: https://goo.gl/photos/GpbWkR37pYb2M7du813) Reboot TV and wait 1-2 minutes.14) Now SamyGO should auto start and the basic services telnet/ftp/etc should work just fine.