Excellent project! I tried to use the remote control exe from my Windows 7 Laptop to my Samsung SmartTV UE55H7080 but it's not found?
Also did a stealth scan for the ports:
A call of http://192.168.1.104:8001/ms/1.0/ gives:
A call of http://192.168.1.104:8001/ws/apps/ gives:
Ultimately I want to remote control my TV from my Fibaro SmartHome which is based on Linux and Lua - probably similar to what DieterKoblenz mentioned earlier in this topic.
I am not sure how to proceed from here - am I missing the point?
Cheers, Frank
Also did a stealth scan for the ports:
Code:
sudo nmap -v -p1-65535 -sS 192.168.1.104
Nmap scan report for samsung-tv.home (192.168.1.104)
Host is up (0.0039s latency).
Not shown: 65525 closed ports
PORT STATE SERVICE
5053/tcp open rlm
7011/tcp open unknown
7676/tcp open imqbrokerd
8000/tcp open http-alt
8001/tcp open vcom-tunnel
8020/tcp open unknown
8080/tcp open http-proxy
8443/tcp open https-alt
9090/tcp open zeus-admin
15500/tcp open unknown
MAC Address: xxxx (Samsung Electronics)A call of http://192.168.1.104:8001/ms/1.0/ gives:
Code:
{
"DUID": "07270e01-0078-1000-8cd0-5056bf79a13d",
"Model": "14_GOLFS",
"ModelName": "UE55H7000",
"ModelDescription": "Samsung TV RCR",
"NetworkType": "wired",
"SSID": "",
"IP": "192.168.1.104",
"FirmwareVersion": "Unknown",
"DeviceName": "[TV] Samsung",
"DeviceID": "07270e01-0078-1000-8cd0-5056bf79a13d",
"UDN": "07270e01-0078-1000-8cd0-5056bf79a13d",
"Resolution": "1920x1080",
"CountryCode": "CH",
"SmartHubAgreement": "true",
"ServiceURI": "http://192.168.1.104:8001/ms/1.0/",
"DialURI": "http://192.168.1.104:8001/ws/apps/",
"Capabilities": [
{
"name": "samsung:multiscreen:1",
"port": "8001",
"location": "/ms/1.0/"
}
]
}A call of http://192.168.1.104:8001/ws/apps/ gives:
Code:
This XML file does not appear to have any style information associated with it. The document tree is shown below.
<root xmlns="urn:schemas-upnp-org:device-1-0" xmlns:sec="http://www.sec.co.kr/dlna">
<specVersion>
<major>1</major>
<minor>0</minor>
</specVersion>
<device>
<deviceType>urn:dial-multiscreen-org:device:dialreceiver:1</deviceType>
<friendlyName>[TV] Samsung</friendlyName>
<manufacturer>Samsung Electronics</manufacturer>
<manufacturerURL>http://www.samsung.com</manufacturerURL>
<modelDescription>Samsung TV RCR</modelDescription>
<modelName>14_GOLFS</modelName>
<UDN>07270e01-0078-1000-8cd0-5056bf79a13d</UDN>
<sec:Capabilities>
<sec:Capability name="samsung:multiscreen:1" port="8001" location="/ms/1.0/"/>
</sec:Capabilities>
<serviceList>
<service>
<serviceType>urn:dial-multiscreen-org:service:dial:1</serviceType>
<serviceId>urn:dial-multiscreen-org:service:dial:1</serviceId>
<controlURL/>
<eventSubURL/>
<SCPDURL/>
</service>
</serviceList>
<presentationURL>/</presentationURL>
</device>
</root>Ultimately I want to remote control my TV from my Fibaro SmartHome which is based on Linux and Lua - probably similar to what DieterKoblenz mentioned earlier in this topic.
I am not sure how to proceed from here - am I missing the point?
Cheers, Frank
Statistics: Posted by frankgeisler — Mon Aug 08, 2016 8:18 pm — Replies 29 — Views 8862